Mi sta per partire il disco?

Ctrpillar · April 18, 2009, 5:03pm

Mi sta per partire il disco?
Sono giorni che fa le bizze, peccato perchè è quasi nuovo, l'ho preso qualche mese fa

Questo è il dmesg:

sd 0:0:0:0: [sda] Add. Sense: Scsi parity error                                 
end_request: I/O error, dev sda, sector 1784457791                              
Buffer I/O error on device sda1, logical block 223057216                        
lost page write due to I/O error on sda1                                        
ata1: EH complete                                                               
sd 0:0:0:0: [sda] 1953525168 512-byte hardware sectors (1000205 MB)             
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x6                  
ata1.00: BMDMA stat 0x24                                                        
ata1: SError: { Handshk }                                                       
ata1.00: cmd 35/00:08:47:ca:5d/00:00:6a:00:00/e0 tag 0 dma 4096 out             
         res 51/84:08:47:ca:5d/84:00:6a:00:00/e0 Emask 0x10 (ATA bus error)     
ata1.00: status: { DRDY ERR }                                                   
ata1.00: error: { ICRC ABRT }                                                   
ata1: hard resetting link                                                       
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)                          
ata1.00: configured for UDMA/33                                                 
ata1: EH complete                                                               
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x6                  
ata1.00: BMDMA stat 0x24                                                        
ata1: SError: { Handshk }                                                       
ata1.00: cmd 35/00:08:47:ca:5d/00:00:6a:00:00/e0 tag 0 dma 4096 out             
         res 51/84:08:47:ca:5d/84:00:6a:00:00/e0 Emask 0x10 (ATA bus error)     
ata1.00: status: { DRDY ERR }                                                   
ata1.00: error: { ICRC ABRT }                                                   
ata1: hard resetting link                                                       
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)                          
ata1.00: configured for UDMA/33                                                 
ata1: EH complete                                                               
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x6                  
ata1.00: BMDMA stat 0x24                                                        
ata1: SError: { Handshk }                                                       
ata1.00: cmd 35/00:08:47:ca:5d/00:00:6a:00:00/e0 tag 0 dma 4096 out             
         res 51/84:08:47:ca:5d/84:00:6a:00:00/e0 Emask 0x10 (ATA bus error)     
ata1.00: status: { DRDY ERR }                                                   
ata1.00: error: { ICRC ABRT }                                                   
ata1: hard resetting link                                                       
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)                          
ata1.00: configured for UDMA/33                                                 
ata1: EH complete                                                               
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x6                  
ata1.00: BMDMA stat 0x24                                                        
ata1: SError: { Handshk }                                                       
ata1.00: cmd 35/00:08:47:ca:5d/00:00:6a:00:00/e0 tag 0 dma 4096 out             
         res 51/84:08:47:ca:5d/84:00:6a:00:00/e0 Emask 0x10 (ATA bus error)     
ata1.00: status: { DRDY ERR }                                                   
ata1.00: error: { ICRC ABRT }                                                   
ata1: hard resetting link                                                       
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)                          
ata1.00: configured for UDMA/33                                                 
ata1: EH complete                                                               
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x6                  
ata1.00: BMDMA stat 0x24                                                        
ata1: SError: { Handshk }                                                       
ata1.00: cmd 35/00:08:47:ca:5d/00:00:6a:00:00/e0 tag 0 dma 4096 out             
         res 51/84:08:47:ca:5d/84:00:6a:00:00/e0 Emask 0x10 (ATA bus error)     
ata1.00: status: { DRDY ERR }                                                   
ata1.00: error: { ICRC ABRT }                                                   
ata1: hard resetting link                                                       
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)                          
ata1.00: configured for UDMA/33                                                 
ata1: EH complete                                                               
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x6                  
ata1.00: BMDMA stat 0x24                                                        
ata1: SError: { Handshk }                                                       
ata1.00: cmd 35/00:08:47:ca:5d/00:00:6a:00:00/e0 tag 0 dma 4096 out             
         res 51/84:08:47:ca:5d/84:00:6a:00:00/e0 Emask 0x10 (ATA bus error)     
ata1.00: status: { DRDY ERR }                                                   
ata1.00: error: { ICRC ABRT }                                                   
ata1: hard resetting link                                                       
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)                          
ata1.00: configured for UDMA/33                                                 
sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK    
sd 0:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor]            
Descriptor sense data with sense descriptors (in hex):                          
        72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00                         
        6a 5d ca 47                                                             
sd 0:0:0:0: [sda] Add. Sense: Scsi parity error                                 
end_request: I/O error, dev sda, sector 1784531527                              
Buffer I/O error on device sda1, logical block 223066433                        
lost page write due to I/O error on sda1                                        
ata1: EH complete                                                               
sd 0:0:0:0: [sda] Write Protect is off                                          
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00                                       
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x6                  
ata1.00: BMDMA stat 0x24                                                        
ata1: SError: { Handshk }                                                       
ata1.00: cmd 35/00:08:2f:55:5e/00:00:6a:00:00/e0 tag 0 dma 4096 out             
         res 51/84:07:30:55:5e/84:00:6a:00:00/e0 Emask 0x10 (ATA bus error)     
ata1.00: status: { DRDY ERR }                                                   
ata1.00: error: { ICRC ABRT }                                                   
ata1: hard resetting link                                                       
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)                          
ata1.00: configured for UDMA/33                                                 
ata1: EH complete                                                               
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x6                  
ata1.00: BMDMA stat 0x24                                                        
ata1: SError: { Handshk }                                                       
ata1.00: cmd 35/00:08:2f:55:5e/00:00:6a:00:00/e0 tag 0 dma 4096 out             
         res 51/84:08:2f:55:5e/84:00:6a:00:00/e0 Emask 0x10 (ATA bus error)     
ata1.00: status: { DRDY ERR }                                                   
ata1.00: error: { ICRC ABRT }                                                   
ata1: hard resetting link                                                       
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)                          
ata1.00: configured for UDMA/33                                                 
ata1: EH complete                                                               
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x6                  
ata1.00: BMDMA stat 0x24                                                        
ata1: SError: { Handshk }                                                       
ata1.00: cmd 35/00:08:2f:55:5e/00:00:6a:00:00/e0 tag 0 dma 4096 out             
         res 51/84:07:30:55:5e/84:00:6a:00:00/e0 Emask 0x10 (ATA bus error)     
ata1.00: status: { DRDY ERR }                                                   
ata1.00: error: { ICRC ABRT }                                                   
ata1: hard resetting link                                                       
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)                          
ata1.00: configured for UDMA/33                                                 
ata1: EH complete                                                               
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x6                  
ata1.00: BMDMA stat 0x24                                                        
ata1: SError: { Handshk }                                                       
ata1.00: cmd 35/00:08:2f:55:5e/00:00:6a:00:00/e0 tag 0 dma 4096 out             
         res 51/84:08:2f:55:5e/84:00:6a:00:00/e0 Emask 0x10 (ATA bus error)     
ata1.00: status: { DRDY ERR }                                                   
ata1.00: error: { ICRC ABRT }                                                   
ata1: hard resetting link                                                       
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)                          
ata1.00: configured for UDMA/33                                                 
ata1: EH complete                                                               
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x6                  
ata1.00: BMDMA stat 0x24                                                        
ata1: SError: { Handshk }                                                       
ata1.00: cmd 35/00:08:2f:55:5e/00:00:6a:00:00/e0 tag 0 dma 4096 out             
         res 51/84:08:2f:55:5e/84:00:6a:00:00/e0 Emask 0x10 (ATA bus error)     
ata1.00: status: { DRDY ERR }                                                   
ata1.00: error: { ICRC ABRT }                                                   
ata1: hard resetting link                                                       
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)                          
ata1.00: configured for UDMA/33                                                 
ata1: EH complete                                                               
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x6                  
ata1.00: BMDMA stat 0x24                                                        
ata1: SError: { Handshk }                                                       
ata1.00: cmd 35/00:08:2f:55:5e/00:00:6a:00:00/e0 tag 0 dma 4096 out             
         res 51/84:07:30:55:5e/84:00:6a:00:00/e0 Emask 0x10 (ATA bus error)     
ata1.00: status: { DRDY ERR }                                                   
ata1.00: error: { ICRC ABRT }                                                   
ata1: hard resetting link                                                       
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)                          
ata1.00: configured for UDMA/33                                                 
sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK    
sd 0:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor]            
Descriptor sense data with sense descriptors (in hex):                          
        72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00                         
        6a 5e 55 30                                                             
sd 0:0:0:0: [sda] Add. Sense: Scsi parity error                                 
end_request: I/O error, dev sda, sector 1784567087                              
Buffer I/O error on device sda1, logical block 223070878                        
lost page write due to I/O error on sda1                                        
ata1: EH complete                                                               
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x6                  
ata1.00: BMDMA stat 0x24                                                        
ata1: SError: { Handshk }                                                       
ata1.00: cmd 35/00:08:07:5b:5e/00:00:6a:00:00/e0 tag 0 dma 4096 out             
         res 51/84:08:07:5b:5e/84:00:6a:00:00/e0 Emask 0x10 (ATA bus error)     
ata1.00: status: { DRDY ERR }                                                   
ata1.00: error: { ICRC ABRT }                                                   
ata1: hard resetting link                                                       
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)                          
ata1.00: configured for UDMA/33                                                 
ata1: EH complete                                                               
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x6                  
ata1.00: BMDMA stat 0x24                                                        
ata1: SError: { Handshk }                                                       
ata1.00: cmd 35/00:08:07:5b:5e/00:00:6a:00:00/e0 tag 0 dma 4096 out             
         res 51/84:08:07:5b:5e/84:00:6a:00:00/e0 Emask 0x10 (ATA bus error)     
ata1.00: status: { DRDY ERR }                                                   
ata1.00: error: { ICRC ABRT }                                                   
ata1: hard resetting link                                                       
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)                          
ata1.00: configured for UDMA/33                                                 
ata1: EH complete                                                               
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x6                  
ata1.00: BMDMA stat 0x24                                                        
ata1: SError: { Handshk }                                                       
ata1.00: cmd 35/00:08:07:5b:5e/00:00:6a:00:00/e0 tag 0 dma 4096 out             
         res 51/84:08:07:5b:5e/84:00:6a:00:00/e0 Emask 0x10 (ATA bus error)     
ata1.00: status: { DRDY ERR }                                                   
ata1.00: error: { ICRC ABRT }                                                   
ata1: hard resetting link                                                       
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)                          
ata1.00: configured for UDMA/33                                                 
ata1: EH complete                                                               
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x6                  
ata1.00: BMDMA stat 0x24                                                        
ata1: SError: { Handshk }                                                       
ata1.00: cmd 35/00:08:07:5b:5e/00:00:6a:00:00/e0 tag 0 dma 4096 out             
         res 51/84:07:08:5b:5e/84:00:6a:00:00/e0 Emask 0x10 (ATA bus error)     
ata1.00: status: { DRDY ERR }                                                   
ata1.00: error: { ICRC ABRT }                                                   
ata1: hard resetting link                                                       
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)                          
ata1.00: configured for UDMA/33                                                 
ata1: EH complete                                                               
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x6                  
ata1.00: BMDMA stat 0x24                                                        
ata1: SError: { Handshk }                                                       
ata1.00: cmd 35/00:08:07:5b:5e/00:00:6a:00:00/e0 tag 0 dma 4096 out             
         res 51/84:08:07:5b:5e/84:00:6a:00:00/e0 Emask 0x10 (ATA bus error)     
ata1.00: status: { DRDY ERR }                                                   
ata1.00: error: { ICRC ABRT }                                                   
ata1: hard resetting link                                                       
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)                          
ata1.00: configured for UDMA/33                                                 
ata1: EH complete                                                               
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x6                  
ata1.00: BMDMA stat 0x24                                                        
ata1: SError: { Handshk }                                                       
ata1.00: cmd 35/00:08:07:5b:5e/00:00:6a:00:00/e0 tag 0 dma 4096 out             
         res 51/84:08:07:5b:5e/84:00:6a:00:00/e0 Emask 0x10 (ATA bus error)     
ata1.00: status: { DRDY ERR }                                                   
ata1.00: error: { ICRC ABRT }                                                   
ata1: hard resetting link                                                       
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)                          
ata1.00: configured for UDMA/33                                                 
sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK    
sd 0:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor]            
Descriptor sense data with sense descriptors (in hex):                          
        72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00                         
        6a 5e 5b 07                                                             
sd 0:0:0:0: [sda] Add. Sense: Scsi parity error                                 
end_request: I/O error, dev sda, sector 1784568583                              
Buffer I/O error on device sda1, logical block 223071065                        
lost page write due to I/O error on sda1                                        
ata1: EH complete                                                               
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA                                                                         
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x6                  
ata1.00: BMDMA stat 0x24                                                        
ata1: SError: { Handshk }                                                       
ata1.00: cmd 35/00:08:47:5f:5e/00:00:6a:00:00/e0 tag 0 dma 4096 out             
         res 51/84:08:47:5f:5e/84:00:6a:00:00/e0 Emask 0x10 (ATA bus error)     
ata1.00: status: { DRDY ERR }                                                   
ata1.00: error: { ICRC ABRT }                                                   
ata1: hard resetting link                                                       
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)                          
ata1.00: configured for UDMA/33                                                 
ata1: EH complete                                                               
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x6                  
ata1.00: BMDMA stat 0x24                                                        
ata1: SError: { Handshk }                                                       
ata1.00: cmd 35/00:08:47:5f:5e/00:00:6a:00:00/e0 tag 0 dma 4096 out             
         res 51/84:08:47:5f:5e/84:00:6a:00:00/e0 Emask 0x10 (ATA bus error)     
ata1.00: status: { DRDY ERR }                                                   
ata1.00: error: { ICRC ABRT }                                                   
ata1: hard resetting link                                                       
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)                          
ata1.00: configured for UDMA/33                                                 
ata1: EH complete                                                               
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x6                  
ata1.00: BMDMA stat 0x24                                                        
ata1: SError: { Handshk }                                                       
ata1.00: cmd 35/00:08:47:5f:5e/00:00:6a:00:00/e0 tag 0 dma 4096 out             
         res 51/84:08:47:5f:5e/84:00:6a:00:00/e0 Emask 0x10 (ATA bus error)     
ata1.00: status: { DRDY ERR }                                                   
ata1.00: error: { ICRC ABRT }                                                   
ata1: hard resetting link                                                       
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)                          
ata1.00: configured for UDMA/33                                                 
ata1: EH complete                                                               
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x6                  
ata1.00: BMDMA stat 0x24                                                        
ata1: SError: { Handshk }                                                       
ata1.00: cmd 35/00:08:47:5f:5e/00:00:6a:00:00/e0 tag 0 dma 4096 out             
         res 51/84:08:47:5f:5e/84:00:6a:00:00/e0 Emask 0x10 (ATA bus error)     
ata1.00: status: { DRDY ERR }                                                   
ata1.00: error: { ICRC ABRT }                                                   
ata1: hard resetting link                                                       
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)                          
ata1.00: configured for UDMA/33                                                 
ata1: EH complete                                                               
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x6                  
ata1.00: BMDMA stat 0x24                                                        
ata1: SError: { Handshk }                                                       
ata1.00: cmd 35/00:08:47:5f:5e/00:00:6a:00:00/e0 tag 0 dma 4096 out             
         res 51/84:08:47:5f:5e/84:00:6a:00:00/e0 Emask 0x10 (ATA bus error)     
ata1.00: status: { DRDY ERR }                                                   
ata1.00: error: { ICRC ABRT }                                                   
ata1: hard resetting link                                                       
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)                          
ata1.00: configured for UDMA/33                                                 
ata1: EH complete                                                               
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x6                  
ata1.00: BMDMA stat 0x24                                                        
ata1: SError: { Handshk }                                                       
ata1.00: cmd 35/00:08:47:5f:5e/00:00:6a:00:00/e0 tag 0 dma 4096 out             
         res 51/84:08:47:5f:5e/84:00:6a:00:00/e0 Emask 0x10 (ATA bus error)     
ata1.00: status: { DRDY ERR }                                                   
ata1.00: error: { ICRC ABRT }                                                   
ata1: hard resetting link                                                       
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)                          
ata1.00: configured for UDMA/33                                                 
sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK    
sd 0:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor]            
Descriptor sense data with sense descriptors (in hex):                          
        72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00                         
        6a 5e 5f 47                                                             
sd 0:0:0:0: [sda] Add. Sense: Scsi parity error                                 
end_request: I/O error, dev sda, sector 1784569671                              
Buffer I/O error on device sda1, logical block 223071201                        
lost page write due to I/O error on sda1                                        
ata1: EH complete                                                               
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x6                  
ata1.00: BMDMA stat 0x24                                                        
ata1: SError: { Handshk }                                                       
ata1.00: cmd 35/00:08:f7:66:5e/00:00:6a:00:00/e0 tag 0 dma 4096 out             
         res 51/84:08:f7:66:5e/84:00:6a:00:00/e0 Emask 0x10 (ATA bus error)     
ata1.00: status: { DRDY ERR }                                                   
ata1.00: error: { ICRC ABRT }                                                   
ata1: hard resetting link                                                       
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)                          
ata1.00: configured for UDMA/33                                                 
ata1: EH complete                                                               
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x6                  
ata1.00: BMDMA stat 0x24                                                        
ata1: SError: { Handshk }                                                       
ata1.00: cmd 35/00:08:f7:66:5e/00:00:6a:00:00/e0 tag 0 dma 4096 out             
         res 51/84:07:f8:66:5e/84:00:6a:00:00/e0 Emask 0x10 (ATA bus error)     
ata1.00: status: { DRDY ERR }                                                   
ata1.00: error: { ICRC ABRT }                                                   
ata1: hard resetting link                                                       
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)                          
ata1.00: configured for UDMA/33                                                 
ata1: EH complete                                                               
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x6                  
ata1.00: BMDMA stat 0x24                                                        
ata1: SError: { Handshk }                                                       
ata1.00: cmd 35/00:08:f7:66:5e/00:00:6a:00:00/e0 tag 0 dma 4096 out             
         res 51/84:07:f8:66:5e/84:00:6a:00:00/e0 Emask 0x10 (ATA bus error)     
ata1.00: status: { DRDY ERR }                                                   
ata1.00: error: { ICRC ABRT }                                                   
ata1: hard resetting link                                                       
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)                          
ata1.00: configured for UDMA/33                                                 
ata1: EH complete                                                               
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x6                  
ata1.00: BMDMA stat 0x24                                                        
ata1: SError: { Handshk }                                                       
ata1.00: cmd 35/00:08:f7:66:5e/00:00:6a:00:00/e0 tag 0 dma 4096 out             
         res 51/84:07:f8:66:5e/84:00:6a:00:00/e0 Emask 0x10 (ATA bus error)     
ata1.00: status: { DRDY ERR }                                                   
ata1.00: error: { ICRC ABRT }                                                   
ata1: hard resetting link                                                       
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)                          
ata1.00: configured for UDMA/33                                                 
ata1: EH complete                                                               
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x6                  
ata1.00: BMDMA stat 0x24                                                        
ata1: SError: { Handshk }                                                       
ata1.00: cmd 35/00:08:f7:66:5e/00:00:6a:00:00/e0 tag 0 dma 4096 out             
         res 51/84:08:f7:66:5e/84:00:6a:00:00/e0 Emask 0x10 (ATA bus error)     
ata1.00: status: { DRDY ERR }                                                   
ata1.00: error: { ICRC ABRT }                                                   
ata1: hard resetting link                                                       
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)                          
ata1.00: configured for UDMA/33                                                 
ata1: EH complete                                                               
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x6                  
ata1.00: BMDMA stat 0x24                                                        
ata1: SError: { Handshk }                                                       
ata1.00: cmd 35/00:08:f7:66:5e/00:00:6a:00:00/e0 tag 0 dma 4096 out             
         res 51/84:08:f7:66:5e/84:00:6a:00:00/e0 Emask 0x10 (ATA bus error)     
ata1.00: status: { DRDY ERR }                                                   
ata1.00: error: { ICRC ABRT }                                                   
ata1: hard resetting link                                                       
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)                          
ata1.00: configured for UDMA/33                                                 
sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK    
sd 0:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor]            
Descriptor sense data with sense descriptors (in hex):                          
        72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00                         
        6a 5e 66 f7                                                             
sd 0:0:0:0: [sda] Add. Sense: Scsi parity error                                 
end_request: I/O error, dev sda, sector 1784571639                              
Buffer I/O error on device sda1, logical block 223071447                        
lost page write due to I/O error on sda1                                        
ata1: EH complete                                                               
sd 0:0:0:0: [sda] 1953525168 512-byte hardware sectors (1000205 MB)             
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x6                  
ata1.00: BMDMA stat 0x24                                                        
ata1: SError: { Handshk }                                                       
ata1.00: cmd 35/00:08:0f:99:5e/00:00:6a:00:00/e0 tag 0 dma 4096 out             
         res 51/84:08:0f:99:5e/84:00:6a:00:00/e0 Emask 0x10 (ATA bus error)     
ata1.00: status: { DRDY ERR }                                                   
ata1.00: error: { ICRC ABRT }                                                   
ata1: hard resetting link                                                       
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)                          
ata1.00: configured for UDMA/33                                                 
ata1: EH complete                                                               
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x6                  
ata1.00: BMDMA stat 0x24                                                        
ata1: SError: { Handshk }                                                       
ata1.00: cmd 35/00:08:0f:99:5e/00:00:6a:00:00/e0 tag 0 dma 4096 out             
         res 51/84:08:0f:99:5e/84:00:6a:00:00/e0 Emask 0x10 (ATA bus error)     
ata1.00: status: { DRDY ERR }                                                   
ata1.00: error: { ICRC ABRT }                                                   
ata1: hard resetting link                                                       
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)                          
ata1.00: configured for UDMA/33                                                 
ata1: EH complete                                                               
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x6                  
ata1.00: BMDMA stat 0x24                                                        
ata1: SError: { Handshk }                                                       
ata1.00: cmd 35/00:08:0f:99:5e/00:00:6a:00:00/e0 tag 0 dma 4096 out             
         res 51/84:08:0f:99:5e/84:00:6a:00:00/e0 Emask 0x10 (ATA bus error)     
ata1.00: status: { DRDY ERR }                                                   
ata1.00: error: { ICRC ABRT }                                                   
ata1: hard resetting link                                                       
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)                          
ata1.00: configured for UDMA/33                                                 
ata1: EH complete                                                               
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x6                  
ata1.00: BMDMA stat 0x24                                                        
ata1: SError: { Handshk }                                                       
ata1.00: cmd 35/00:08:0f:99:5e/00:00:6a:00:00/e0 tag 0 dma 4096 out             
         res 51/84:08:0f:99:5e/84:00:6a:00:00/e0 Emask 0x10 (ATA bus error)     
ata1.00: status: { DRDY ERR }                                                   
ata1.00: error: { ICRC ABRT }                                                   
ata1: hard resetting link                                                       
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)                          
ata1.00: configured for UDMA/33                                                 
ata1: EH complete                                                               
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x6                  
ata1.00: BMDMA stat 0x24                                                        
ata1: SError: { Handshk }                                                       
ata1.00: cmd 35/00:08:0f:99:5e/00:00:6a:00:00/e0 tag 0 dma 4096 out             
         res 51/84:08:0f:99:5e/84:00:6a:00:00/e0 Emask 0x10 (ATA bus error)     
ata1.00: status: { DRDY ERR }                                                   
ata1.00: error: { ICRC ABRT }                                                   
ata1: hard resetting link                                                       
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)                          
ata1.00: configured for UDMA/33                                                 
ata1: EH complete                                                               
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x6                  
ata1.00: BMDMA stat 0x24                                                        
ata1: SError: { Handshk }                                                       
ata1.00: cmd 35/00:08:0f:99:5e/00:00:6a:00:00/e0 tag 0 dma 4096 out             
         res 51/84:08:0f:99:5e/84:00:6a:00:00/e0 Emask 0x10 (ATA bus error)     
ata1.00: status: { DRDY ERR }                                                   
ata1.00: error: { ICRC ABRT }                                                   
ata1: hard resetting link                                                       
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)                          
ata1.00: configured for UDMA/33                                                 
sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK    
sd 0:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor]            
Descriptor sense data with sense descriptors (in hex):                          
        72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00                         
        6a 5e 99 0f                                                             
sd 0:0:0:0: [sda] Add. Sense: Scsi parity error                                 
end_request: I/O error, dev sda, sector 1784584463                              
Buffer I/O error on device sda1, logical block 223073050                        
lost page write due to I/O error on sda1                                        
ata1: EH complete                                                               
sd 0:0:0:0: [sda] Write Protect is off                                          
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00                                       
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x6                  
ata1.00: BMDMA stat 0x24                                                        
ata1: SError: { Handshk }                                                       
ata1.00: cmd 35/00:08:7f:a9:5e/00:00:6a:00:00/e0 tag 0 dma 4096 out             
         res 51/84:08:7f:a9:5e/84:00:6a:00:00/e0 Emask 0x10 (ATA bus error)     
ata1.00: status: { DRDY ERR }                                                   
ata1.00: error: { ICRC ABRT }                                                   
ata1: hard resetting link                                                       
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)                          
ata1.00: configured for UDMA/33                                                 
ata1: EH complete                                                               
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x6                  
ata1.00: BMDMA stat 0x24                                                        
ata1: SError: { Handshk }                                                       
ata1.00: cmd 35/00:08:7f:a9:5e/00:00:6a:00:00/e0 tag 0 dma 4096 out             
         res 51/84:08:7f:a9:5e/84:00:6a:00:00/e0 Emask 0x10 (ATA bus error)     
ata1.00: status: { DRDY ERR }                                                   
ata1.00: error: { ICRC ABRT }                                                   
ata1: hard resetting link                                                       
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)                          
ata1.00: configured for UDMA/33                                                 
ata1: EH complete                                                               
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x6                  
ata1.00: BMDMA stat 0x24                                                        
ata1: SError: { Handshk }                                                       
ata1.00: cmd 35/00:08:7f:a9:5e/00:00:6a:00:00/e0 tag 0 dma 4096 out             
         res 51/84:07:80:a9:5e/84:00:6a:00:00/e0 Emask 0x10 (ATA bus error)     
ata1.00: status: { DRDY ERR }                                                   
ata1.00: error: { ICRC ABRT }                                                   
ata1: hard resetting link                                                       
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)                          
ata1.00: configured for UDMA/33                                                 
ata1: EH complete                                                               
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x6                  
ata1.00: BMDMA stat 0x24                                                        
ata1: SError: { Handshk }                                                       
ata1.00: cmd 35/00:08:7f:a9:5e/00:00:6a:00:00/e0 tag 0 dma 4096 out             
         res 51/84:08:7f:a9:5e/84:00:6a:00:00/e0 Emask 0x10 (ATA bus error)     
ata1.00: status: { DRDY ERR }                                                   
ata1.00: error: { ICRC ABRT }                                                   
ata1: hard resetting link                                                       
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)                          
ata1.00: configured for UDMA/33                                                 
ata1: EH complete                                                               
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x6                  
ata1.00: BMDMA stat 0x24                                                        
ata1: SError: { Handshk }                                                       
ata1.00: cmd 35/00:08:7f:a9:5e/00:00:6a:00:00/e0 tag 0 dma 4096 out             
         res 51/84:08:7f:a9:5e/84:00:6a:00:00/e0 Emask 0x10 (ATA bus error)     
ata1.00: status: { DRDY ERR }                                                   
ata1.00: error: { ICRC ABRT }                                                   
ata1: hard resetting link                                                       
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)                          
ata1.00: configured for UDMA/33                                                 
ata1: EH complete                                                               
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x6                  
ata1.00: BMDMA stat 0x24                                                        
ata1: SError: { Handshk }                                                       
ata1.00: cmd 35/00:08:7f:a9:5e/00:00:6a:00:00/e0 tag 0 dma 4096 out             
         res 51/84:08:7f:a9:5e/84:00:6a:00:00/e0 Emask 0x10 (ATA bus error)     
ata1.00: status: { DRDY ERR }                                                   
ata1.00: error: { ICRC ABRT }                                                   
ata1: hard resetting link                                                       
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)                          
ata1.00: configured for UDMA/33                                                 
sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK    
sd 0:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor]            
Descriptor sense data with sense descriptors (in hex):                          
        72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00                         
        6a 5e a9 7f                                                             
sd 0:0:0:0: [sda] Add. Sense: Scsi parity error                                 
end_request: I/O error, dev sda, sector 1784588671                              
Buffer I/O error on device sda1, logical block 223073576                        
lost page write due to I/O error on sda1                                        
ata1: EH complete                                                               
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x6                  
ata1.00: BMDMA stat 0x24                                                        
ata1: SError: { Handshk }                                                       
ata1.00: cmd 35/00:08:1f:bd:5e/00:00:6a:00:00/e0 tag 0 dma 4096 out             
         res 51/84:08:1f:bd:5e/84:00:6a:00:00/e0 Emask 0x10 (ATA bus error)     
ata1.00: status: { DRDY ERR }                                                   
ata1.00: error: { ICRC ABRT }                                                   
ata1: hard resetting link                                                       
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)                          
ata1.00: configured for UDMA/33                                                 
ata1: EH complete                                                               
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x6                  
ata1.00: BMDMA stat 0x24                                                        
ata1: SError: { Handshk }                                                       
ata1.00: cmd 35/00:08:1f:bd:5e/00:00:6a:00:00/e0 tag 0 dma 4096 out             
         res 51/84:08:1f:bd:5e/84:00:6a:00:00/e0 Emask 0x10 (ATA bus error)     
ata1.00: status: { DRDY ERR }                                                   
ata1.00: error: { ICRC ABRT }                                                   
ata1: hard resetting link                                                       
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)                          
ata1.00: configured for UDMA/33                                                 
ata1: EH complete                                                               
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x6                  
ata1.00: BMDMA stat 0x24                                                        
ata1: SError: { Handshk }                                                       
ata1.00: cmd 35/00:08:1f:bd:5e/00:00:6a:00:00/e0 tag 0 dma 4096 out             
         res 51/84:08:1f:bd:5e/84:00:6a:00:00/e0 Emask 0x10 (ATA bus error)     
ata1.00: status: { DRDY ERR }                                                   
ata1.00: error: { ICRC ABRT }                                                   
ata1: hard resetting link                                                       
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)                          
ata1.00: configured for UDMA/33                                                 
ata1: EH complete                                                               
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x6                  
ata1.00: BMDMA stat 0x24                                                        
ata1: SError: { Handshk }                                                       
ata1.00: cmd 35/00:08:1f:bd:5e/00:00:6a:00:00/e0 tag 0 dma 4096 out             
         res 51/84:08:1f:bd:5e/84:00:6a:00:00/e0 Emask 0x10 (ATA bus error)     
ata1.00: status: { DRDY ERR }                                                   
ata1.00: error: { ICRC ABRT }                                                   
ata1: hard resetting link                                                       
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)                          
ata1.00: configured for UDMA/33                                                 
ata1: EH complete                                                               
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x6                  
ata1.00: BMDMA stat 0x24                                                        
ata1: SError: { Handshk }                                                       
ata1.00: cmd 35/00:08:1f:bd:5e/00:00:6a:00:00/e0 tag 0 dma 4096 out             
         res 51/84:08:1f:bd:5e/84:00:6a:00:00/e0 Emask 0x10 (ATA bus error)     
ata1.00: status: { DRDY ERR }                                                   
ata1.00: error: { ICRC ABRT }                                                   
ata1: hard resetting link                                                       
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)                          
ata1.00: configured for UDMA/33                                                 
ata1: EH complete                                                               
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x6                  
ata1.00: BMDMA stat 0x24                                                        
ata1: SError: { Handshk }                                                       
ata1.00: cmd 35/00:08:1f:bd:5e/00:00:6a:00:00/e0 tag 0 dma 4096 out             
         res 51/84:08:1f:bd:5e/84:00:6a:00:00/e0 Emask 0x10 (ATA bus error)     
ata1.00: status: { DRDY ERR }                                                   
ata1.00: error: { ICRC ABRT }                                                   
ata1: hard resetting link                                                       
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)                          
ata1.00: configured for UDMA/33                                                 
sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK    
sd 0:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor]            
Descriptor sense data with sense descriptors (in hex):                          
        72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00                         
        6a 5e bd 1f                                                             
sd 0:0:0:0: [sda] Add. Sense: Scsi parity error                                 
end_request: I/O error, dev sda, sector 1784593695                              
Buffer I/O error on device sda1, logical block 223074204                        
lost page write due to I/O error on sda1                                        
ata1: EH complete                                                               
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA                                                                         
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x6                  
ata1.00: BMDMA stat 0x24                                                        
ata1: SError: { Handshk }                                                       
ata1.00: cmd 35/00:08:f7:30:5f/00:00:6a:00:00/e0 tag 0 dma 4096 out             
         res 51/84:08:f7:30:5f/84:00:6a:00:00/e0 Emask 0x10 (ATA bus error)     
ata1.00: status: { DRDY ERR }                                                   
ata1.00: error: { ICRC ABRT }                                                   
ata1: hard resetting link                                                       
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)                          
ata1.00: configured for UDMA/33                                                 
ata1: EH complete                                                               
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x6                  
ata1.00: BMDMA stat 0x24                                                        
ata1: SError: { Handshk }                                                       
ata1.00: cmd 35/00:08:f7:30:5f/00:00:6a:00:00/e0 tag 0 dma 4096 out             
         res 51/84:08:f7:30:5f/84:00:6a:00:00/e0 Emask 0x10 (ATA bus error)     
ata1.00: status: { DRDY ERR }                                                   
ata1.00: error: { ICRC ABRT }                                                   
ata1: hard resetting link                                                       
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)                          
ata1.00: configured for UDMA/33                                                 
ata1: EH complete                                                               
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x6                  
ata1.00: BMDMA stat 0x24                                                        
ata1: SError: { Handshk }                                                       
ata1.00: cmd 35/00:08:f7:30:5f/00:00:6a:00:00/e0 tag 0 dma 4096 out             
         res 51/84:08:f7:30:5f/84:00:6a:00:00/e0 Emask 0x10 (ATA bus error)     
ata1.00: status: { DRDY ERR }                                                   
ata1.00: error: { ICRC ABRT }                                                   
ata1: hard resetting link                                                       
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)                          
ata1.00: configured for UDMA/33                                                 
ata1: EH complete                                                               
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x6                  
ata1.00: BMDMA stat 0x24                                                        
ata1: SError: { Handshk }                                                       
ata1.00: cmd 35/00:08:f7:30:5f/00:00:6a:00:00/e0 tag 0 dma 4096 out             
         res 51/84:08:f7:30:5f/84:00:6a:00:00/e0 Emask 0x10 (ATA bus error)     
ata1.00: status: { DRDY ERR }                                                   
ata1.00: error: { ICRC ABRT }                                                   
ata1: hard resetting link                                                       
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)                          
ata1.00: configured for UDMA/33                                                 
ata1: EH complete                                                               
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x6                  
ata1.00: BMDMA stat 0x24                                                        
ata1: SError: { Handshk }                                                       
ata1.00: cmd 35/00:08:f7:30:5f/00:00:6a:00:00/e0 tag 0 dma 4096 out             
         res 51/84:08:f7:30:5f/84:00:6a:00:00/e0 Emask 0x10 (ATA bus error)     
ata1.00: status: { DRDY ERR }                                                   
ata1.00: error: { ICRC ABRT }                                                   
ata1: hard resetting link                                                       
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)                          
ata1.00: configured for UDMA/33                                                 
ata1: EH complete                                                               
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x6                  
ata1.00: BMDMA stat 0x24                                                        
ata1: SError: { Handshk }                                                       
ata1.00: cmd 35/00:08:f7:30:5f/00:00:6a:00:00/e0 tag 0 dma 4096 out             
         res 51/84:08:f7:30:5f/84:00:6a:00:00/e0 Emask 0x10 (ATA bus error)     
ata1.00: status: { DRDY ERR }                                                   
ata1.00: error: { ICRC ABRT }                                                   
ata1: hard resetting link                                                       
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)                          
ata1.00: configured for UDMA/33                                                 
sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK    
sd 0:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor]            
Descriptor sense data with sense descriptors (in hex):                          
        72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00                         
        6a 5f 30 f7                                                             
sd 0:0:0:0: [sda] Add. Sense: Scsi parity error                                 
end_request: I/O error, dev sda, sector 1784623351                              
Buffer I/O error on device sda1, logical block 223077911                        
lost page write due to I/O error on sda1                                        
ata1: EH complete                                                               
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x1800000 action 0x6                 
ata1.00: BMDMA stat 0x25                                                        
ata1: SError: { LinkSeq TrStaTrns }                                             
ata1.00: cmd 35/00:18:67:32:62/00:00:6a:00:00/e0 tag 0 dma 12288 out            
         res 51/84:18:67:32:62/84:00:6a:00:00/e0 Emask 0x10 (ATA bus error)     
ata1.00: status: { DRDY ERR }                                                   
ata1.00: error: { ICRC ABRT }                                                   
ata1: hard resetting link                                                       
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)                          
ata1.00: configured for UDMA/33                                                 
ata1: EH complete                                                               
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x6                  
ata1.00: BMDMA stat 0x25                                                        
ata1: SError: { Handshk }                                                       
ata1.00: cmd 35/00:18:67:32:62/00:00:6a:00:00/e0 tag 0 dma 12288 out            
         res 51/84:16:69:32:62/84:00:6a:00:00/e0 Emask 0x10 (ATA bus error)     
ata1.00: status: { DRDY ERR }                                                   
ata1.00: error: { ICRC ABRT }                                                   
ata1: hard resetting link                                                       
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)                          
ata1.00: configured for UDMA/33                                                 
ata1: EH complete                                                               
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x6                  
ata1.00: BMDMA stat 0x25                                                        
ata1: SError: { Handshk }                                                       
ata1.00: cmd 35/00:18:67:32:62/00:00:6a:00:00/e0 tag 0 dma 12288 out            
         res 51/84:18:67:32:62/84:00:6a:00:00/e0 Emask 0x10 (ATA bus error)     
ata1.00: status: { DRDY ERR }                                                   
ata1.00: error: { ICRC ABRT }                                                   
ata1: hard resetting link                                                       
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)                          
ata1.00: configured for UDMA/33                                                 
ata1: EH complete                                                               
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x1c00000 action 0x6                 
ata1.00: BMDMA stat 0x25                                                        
ata1: SError: { Handshk LinkSeq TrStaTrns }                                     
ata1.00: cmd 35/00:18:67:32:62/00:00:6a:00:00/e0 tag 0 dma 12288 out            
         res 51/84:17:68:32:62/84:00:6a:00:00/e0 Emask 0x10 (ATA bus error)     
ata1.00: status: { DRDY ERR }                                                   
ata1.00: error: { ICRC ABRT }                                                   
ata1: hard resetting link                                                       
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)                          
ata1.00: configured for UDMA/33                                                 
ata1: EH complete                                                               
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x6                  
ata1.00: BMDMA stat 0x25                                                        
ata1: SError: { Handshk }                                                       
ata1.00: cmd 35/00:18:67:32:62/00:00:6a:00:00/e0 tag 0 dma 12288 out            
         res 51/84:17:68:32:62/84:00:6a:00:00/e0 Emask 0x10 (ATA bus error)     
ata1.00: status: { DRDY ERR }                                                   
ata1.00: error: { ICRC ABRT }                                                   
ata1: hard resetting link                                                       
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)                          
ata1.00: configured for UDMA/33                                                 
ata1: EH complete                                                               
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x6                  
ata1.00: BMDMA stat 0x25                                                        
ata1: SError: { Handshk }                                                       
ata1.00: cmd 35/00:18:67:32:62/00:00:6a:00:00/e0 tag 0 dma 12288 out            
         res 51/84:17:68:32:62/84:00:6a:00:00/e0 Emask 0x10 (ATA bus error)     
ata1.00: status: { DRDY ERR }                                                   
ata1.00: error: { ICRC ABRT }                                                   
ata1: hard resetting link                                                       
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)                          
ata1.00: configured for UDMA/33                                                 
sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK    
sd 0:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor]            
Descriptor sense data with sense descriptors (in hex):                          
        72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00                         
        6a 62 32 68                                                             
sd 0:0:0:0: [sda] Add. Sense: Scsi parity error                                 
end_request: I/O error, dev sda, sector 1784820327                              
Buffer I/O error on device sda1, logical block 223102533                        
lost page write due to I/O error on sda1                                        
Buffer I/O error on device sda1, logical block 223102534                        
lost page write due to I/O error on sda1                                        
Buffer I/O error on device sda1, logical block 223102535                        
lost page write due to I/O error on sda1                                        
ata1: EH complete                                                               
sd 0:0:0:0: [sda] 1953525168 512-byte hardware sectors (1000205 MB)             
sd 0:0:0:0: [sda] Write Protect is off                                          
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00                                       
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA                                                                         
sd 0:0:0:0: [sda] 1953525168 512-byte hardware sectors (1000205 MB)             
sd 0:0:0:0: [sda] Write Protect is off                                          
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00                                       
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x6                  
ata1.00: BMDMA stat 0x24                                                        
ata1: SError: { Handshk }                                                       
ata1.00: cmd 35/00:08:2f:92:5b/00:00:6a:00:00/e0 tag 0 dma 4096 out             
         res 51/84:08:2f:92:5b/84:00:6a:00:00/e0 Emask 0x10 (ATA bus error)     
ata1.00: status: { DRDY ERR }                                                   
ata1.00: error: { ICRC ABRT }                                                   
ata1: hard resetting link                                                       
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)                          
ata1.00: configured for UDMA/33                                                 
ata1: EH complete                                                               
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x6                  
ata1.00: BMDMA stat 0x24                                                        
ata1: SError: { Handshk }                                                       
ata1.00: cmd 35/00:08:2f:92:5b/00:00:6a:00:00/e0 tag 0 dma 4096 out             
         res 51/84:08:2f:92:5b/84:00:6a:00:00/e0 Emask 0x10 (ATA bus error)     
ata1.00: status: { DRDY ERR }                                                   
ata1.00: error: { ICRC ABRT }                                                   
ata1: hard resetting link                                                       
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)                          
ata1.00: configured for UDMA/33                                                 
ata1: EH complete                                                               
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x6                  
ata1.00: BMDMA stat 0x24                                                        
ata1: SError: { Handshk }                                                       
ata1.00: cmd 35/00:08:2f:92:5b/00:00:6a:00:00/e0 tag 0 dma 4096 out             
         res 51/84:08:2f:92:5b/84:00:6a:00:00/e0 Emask 0x10 (ATA bus error)     
ata1.00: status: { DRDY ERR }                                                   
ata1.00: error: { ICRC ABRT }                                                   
ata1: hard resetting link                                                       
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)                          
ata1.00: configured for UDMA/33                                                 
ata1: EH complete                                                               
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x6                  
ata1.00: BMDMA stat 0x24                                                        
ata1: SError: { Handshk }                                                       
ata1.00: cmd 35/00:08:2f:92:5b/00:00:6a:00:00/e0 tag 0 dma 4096 out             
         res 51/84:08:2f:92:5b/84:00:6a:00:00/e0 Emask 0x10 (ATA bus error)     
ata1.00: status: { DRDY ERR }                                                   
ata1.00: error: { ICRC ABRT }                                                   
ata1: hard resetting link                                                       
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)                          
ata1.00: configured for UDMA/33                                                 
ata1: EH complete                                                               
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x6                  
ata1.00: BMDMA stat 0x24                                                        
ata1: SError: { Handshk }                                                       
ata1.00: cmd 35/00:08:2f:92:5b/00:00:6a:00:00/e0 tag 0 dma 4096 out             
         res 51/84:08:2f:92:5b/84:00:6a:00:00/e0 Emask 0x10 (ATA bus error)     
ata1.00: status: { DRDY ERR }                                                   
ata1.00: error: { ICRC ABRT }                                                   
ata1: hard resetting link                                                       
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)                          
ata1.00: configured for UDMA/33                                                 
ata1: EH complete                                                               
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x6                  
ata1.00: BMDMA stat 0x24                                                        
ata1: SError: { Handshk }                                                       
ata1.00: cmd 35/00:08:2f:92:5b/00:00:6a:00:00/e0 tag 0 dma 4096 out             
         res 51/84:08:2f:92:5b/84:00:6a:00:00/e0 Emask 0x10 (ATA bus error)     
ata1.00: status: { DRDY ERR }                                                   
ata1.00: error: { ICRC ABRT }                                                   
ata1: hard resetting link                                                       
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)                          
ata1.00: configured for UDMA/33                                                 
sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK    
sd 0:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor]            
Descriptor sense data with sense descriptors (in hex):                          
        72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00                         
        6a 5b 92 2f                                                             
sd 0:0:0:0: [sda] Add. Sense: Scsi parity error                                 
end_request: I/O error, dev sda, sector 1784386095                              
Buffer I/O error on device sda1, logical block 223048254                        
lost page write due to I/O error on sda1                                        
ata1: EH complete                                                               
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x6                  
ata1.00: BMDMA stat 0x24                                                        
ata1: SError: { Handshk }                                                       
ata1.00: cmd 35/00:08:3f:67:5c/00:00:6a:00:00/e0 tag 0 dma 4096 out             
         res 51/84:08:3f:67:5c/84:00:6a:00:00/e0 Emask 0x10 (ATA bus error)     
ata1.00: status: { DRDY ERR }                                                   
ata1.00: error: { ICRC ABRT }                                                   
ata1: hard resetting link                                                       
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)                          
ata1.00: configured for UDMA/33                                                 
ata1: EH complete                                                               
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x6                  
ata1.00: BMDMA stat 0x24                                                        
ata1: SError: { Handshk }                                                       
ata1.00: cmd 35/00:08:3f:67:5c/00:00:6a:00:00/e0 tag 0 dma 4096 out             
         res 51/84:08:3f:67:5c/84:00:6a:00:00/e0 Emask 0x10 (ATA bus error)     
ata1.00: status: { DRDY ERR }                                                   
ata1.00: error: { ICRC ABRT }                                                   
ata1: hard resetting link                                                       
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)                          
ata1.00: configured for UDMA/33                                                 
ata1: EH complete                                                               
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x6                  
ata1.00: BMDMA stat 0x24                                                        
ata1: SError: { Handshk }                                                       
ata1.00: cmd 35/00:08:3f:67:5c/00:00:6a:00:00/e0 tag 0 dma 4096 out             
         res 51/84:08:3f:67:5c/84:00:6a:00:00/e0 Emask 0x10 (ATA bus error)

Knu · April 19, 2009, 12:38am

hai gia' provato a cambiare cavo / porta sata? giusto per scrupolo

Ctrpillar · April 19, 2009, 11:10am

nu, proverò lunedì

Nyarlathothep · April 19, 2009, 3:18pm

Oltre che controllare il cavo, che non fa mai male, io ti consiglio di eseguire i test S.M.A.R.T. usando smartctl dal pacchetto smartmontools.

Ctrpillar · April 23, 2009, 10:32am

Ho copiato tutto usando dd su un disco nuovo di zecca e usando un cavo diverso. Tutto ok.
Il fatto è che ora anche col cavo vecchio non da problemi (da almeno 1 ora)

Sto facendo girare le utility di diagnostica della western digital e dice che almeno nel quick test non ci sono errori, quindi a quanto pare la scheda dovrebbe funzionare bene. Ora sta facendo il test avanzato che finirà fra 3 ore...

Non so più che pensare

Comunque guarda, continuiamo la discussione qui
http://gaming.ngi.it/showthread.php?p=11622272#post11622272
altrimenti teniamo aperti 2 topic per la stessa cosa